Watchguard Firebox X1000, Reference Manual

Page: 179 / 264

Policy Manager
Reference Guide 167
Src Port
Enter a port number to restrict the routing policy to a single
source port.
OK
Closes this dialog box and saves any changes.
Advanced NAT Settings dialog box
Server-Based tab
Enable Service-Based NAT
Enable this checkbox to allow service-based NAT, which is
dynamic NAT on a per-service basis. Once enabled, use the
Outgoinb tab of each service icon to refine your NAT
configuraiton.
1-to-1 NAT Setup tab
Enable 1-to-1 NAT
Check to enable 1-to-1 NAT. This type of NAT redirects packets
sent to one range of addresses to a different range of addresses.
1-to-1 NAT Setup list
Lists the IP addresses to be redirected.
Add
Select to add other IP addresses to be redirected. The 1-to-1
Mapping dialog box opens.
Edit
Select to edit the IP addresses choosen from the list above. The 1-
to-1 Mapping dialog box opens.
Remove
Select to remove IP addresses choosen from the list above.
Dynamic NAT Exceptions tab
Exception entries
Dynamic NAT Exceptions allows you to configure exceptions to
simple dynamic NAT and service-based dynamic NAT. Dynamic
NAT Exceptions do not apply to 1-to-1 NAT.