Watchguard Firebox X1000, Reference Manual

Page: 188 / 264

CHAPTER 10: Field Definitions
176 WatchGuard Firebox System
Remove
Click to remove a tunnel.
Configure Tunnels dialog box
Configure Tunnels
A list of the gateway, name, and type of configured tunnels.
Add
Click to configure a new IPSec tunnel.
Edit
Click to access the Configure Tunnels dialog box where you can
edit the selected tunnel.
Remove
Click to delete the selected tunnel.
OK
Configure Tunnel dialog box
Identity tab
Name
Enter the name of a tunnel. This name is used to identify the
tunnel in monitoring and administration tools.
Phase 2 Settings tab
Type
Select the security association protocol type from the drop list:
ESP (Encapsulated Security Payload) or AH (Authentication
Header).
Authentication
From the drop list select an authentication method.
None - No authentication
MD5-HMAC - 128-bit algorithm
SHA1-HMAC - 160-bit algorithm