Watchguard Firebox X1000, Reference Manual

Page: 176 / 264

CHAPTER 10: Field Definitions
164 WatchGuard Firebox System
Add Route dialog box
Route
Select to add a new route to the network protected by the Firebox.
Net - Select when an entire network is behind a router.
Host - Select when only one host is behind a router.
IP Address
Enter the IP address of the host behind the router.
Network Address
Enter the network address behind the router using slash notation.
Gateway
Enter the gateway IP address. You must specify an address that is
on the same network as the Firebox.
OK
Closes this dialog box and saves any changes.
Add Service dialog box
Name
Enter the name of the new service.
Comments
Enter comments or a description of this version of the service to
assist with identification.
Add Static NAT dialog box
External IP Address
Select from the drop list the publice address to be used for the
service. If the public address does not appear in the drop list, click
Edit to open the Add External IP Address dialog box.
Edit
Click to open the Add External IP Address dialog box. You use
this dialog box if the public address does not appear iin the
External IP Address drop list.