Policy Manager
Reference Guide
161
Selected Members and Addresses
Lists the names and addresses of selected members.
OK
Closes this dialog box and saves any changes.
Add Dynamic NAT dialog box
From
Select from the drop list or select the
...
to enter the IP address or
host alias of the origin of outgoing packets. For example, use the
trusted host alias to enable NAT from the Trusted network.
...
Click to enter the IP address. The Add Address dialog box opens.
To
Use the drop list or enter the IP address to specify the destination
of outgoing packets.
...
Click to enter the IP address. The Add Memeber dialog box opens.
OK
Closes this dialog box and saves any changes.
Add Exception dialog box
From
Select from the drop list or select the
...
to enter the IP address of
the host alias on which to not perform dynamic NAT.
...
Click to enter the IP address. The Add Address dialog box opens.
To
Select from the drop list or select the
...
to enter the IP address or
host alias of the host on which to not perform dynamic NAT.
...
Click to enter the IP address. The Add Member dialog box opens.
OK
Closes this dialog box and saves any changes.
Summary of Contents for Firebox X1000
