Watchguard Firebox X1000, Reference Manual

Page: 177 / 264

Policy Manager
Reference Guide 165
Internal IP Address
Enter the final destination of incoming packets on the Trusted
network.
Set internal port to different port than service
This feature is rarely used. It enables you to redirect packets to not
only a specific internal host but also to an alternative port.
Internal Port
If you enable the above checkbox, enter the final port destination
of incoming packets to the Trusted network.
OK
Closes this dialog box and saves any changes.
Advanced DVCP Policy Configuration dialog box
Allow access to
Select or enter the host or network and port/protocol/client port
you want to allow access via DVCP.
Dst Port
Enter a port number to restrict the routing policy to a single
destination port.
Protocol
Select a protocol type to restrict the routing policy to a particular
protocol.
Src Port
Enter a port number to restrict the routing policy to a single
source port.
OK
Closes this dialog box and saves any changes.
Advanced Dynamic NAT dialog box
Dynamic NAT
List the hosts for which dynamic NAT will be disabled.
Add
Click to add a host.