Watchguard Firebox FireboxTM System 4.6 Page 135 User Manual Download

Page: 135 / 170

User Guide

125

Branch office VPN with IPSec

and how WatchGuard implements branch office VPN with IPSec, see the

Network

Security Handbook.

From Policy Manager:

• Select

Network => Branch Office VPN => IPSec

Configuring a gateway

A gateway specifies endpoints for one or more tunnels. The standard specified for a
gateway, such as isakmp automated key negotiation, becomes the standard for
tunnels created with the gateway.

Adding a gateway

From the

IPSec Configuration

dialog box:

Click

Gateways

To add a gateway, click

Add

Enter the gateway name.

This name identifies a gateway only within Policy Manager.

Use the

Key Negotiation Type

drop list to select either

isakmp (dynamic)

Manual

For more information, see “Configuring a tunnel with dynamic security” on page 127 and

“Configuring a tunnel with manual security” on page 126.

In the

Remote Gateway IP

field, enter the IP address of the Firebox (or other

IPSec-compliant host) at the other end of the gateway.

Enter the shared key.

The Shared Key field is available only for ISAKMP-negotiated gateways. The same key must be

entered at the remote gateway.

Click

The Configure Gateways dialog box appears listing the newly configured gateway. Repeat the

Add Gateway procedure to add additional gateways.

When you finish adding gateways, click

to return to the

IPSec Configuration

dialog box.

Editing a gateway

From the

Configure Gateways

dialog box:

Click the gateway. Click

Edit

The IPSec Gateway dialog box appears.

Make changes according to your security policy preferences.

Click

• Determine the tunnel and policy endpoints
• Select an encryption method
• Select an authentication method

Summary of Contents for Firebox FireboxTM System 4.6











































































































































































Search results

Summary of Contents for Firebox FireboxTM System 4.6

Reviews:

Related manuals for Firebox FireboxTM System 4.6

Brands by name

Popular brands

Watchguard Firebox FireboxTM System 4.6, User Manual

Search results

Summary of Contents for Firebox FireboxTM System 4.6

Reviews:

Related manuals for Firebox FireboxTM System 4.6

Brands by name

Popular brands