Page 61 of 68
Doc. P/N:
WSP-009-002
Version: V2.3
Issue Date: July 2014
Installation Manual
www.wassp.com
STEP
PROCEDURE
SCREEN
1
Turn on the power
:
a. Press the POWER button on the transceiver.
The transceiver starts up and the STATUS lamp
glows GREEN - this can take up to 30 seconds.
b. Turn on the computer.
In standard installations, the WMB-160/80F
program self loads.
The program then performs a self-calibration
(STBY button turns YELLOW). When the button
turns BLUE it is ready to go.
If no dongle is found, a
Dongle Error
box ap-
pears on the screen.
Ensure a dongle has been plugged into the
computer’s USB port and click
Retry
.
c. Turn on the satellite compass according to the
manufacturer’s instructions.
STATUS
POWER
You can click
Cancel
and run a demo file from the System
Configuration Utility.
2
Choose a display mode
:
a. Click the window layout button representing the
screen layout you require:
Single.
2-Horizontal Split Screen.
2-Vertical Split Screen.
4-Screen.
b. Keep clicking the layout button you have cho-
sen until the display mode or modes you require
displays.
These can be re-configured in the
System
Configuration Utility
.
See Operator Manual OM_WMB_SYS for
details.
SINGLE
2-HORIZONTAL
2-VERTICAL
4-SCREEN
Start Up / Shut Down
Procedures
Note: It is usually easier to select the
display modes after you have started
transmitting, as you can see the ac-
tual modes displayed.
