Page 37 of 68
Doc. P/N:
WSP-009-002
Version: V2.3
Issue Date: July 2014
Installation Manual
www.wassp.com
Serial Transfer Task Settings
The Serial Task Transfer box has two tabbed pages for configuring serial transfer
settings:
►
NMEA Settings tab page. See Figure 22.
►
WASSP Settings tab page. See Figure 23.
The NMEA and WASSP tabbed pages allow you to configure a number of NMEA
and WMB-160/80F set up and communication port settings.
To open the Serial Task Transfer box and enter the NMEA and WMB-160/80F set
up and communication port settings:
1
1)
Right-click the
Serial Transfer Task
icon on
the Windows Task bar.
2)
Click
Setup
.
The Serial Transfer Task box opens.
3)
In the NMEA Settings and WASSP Settings
tabbed page configure the
Network Setup
and
NMEA Com Port Settings
.
2
Figure 22 – NMEA Settings Tabbed Page
Note: If the Serial Transfer Task icon is not avail-
able on the Task Bar, click Start > Programs >
WASSP WMB160/80F Transfer Task.
