Page 32 of 68
Doc. P/N: WSP-009-002
Version: V2.3
Issue Date: July 2014
Installation Manual
www.wassp.com
Install DirectX
Click
I accept the agreement
and then follow instructions.
After DirectX is installed, the
BTxR Software will update.
The default is to have Direct X and
BTxR selected. If you have the
BTxR selected, ensure it is tuned on
and connected.
Click
Finish
8
9
10
1
1)
Right-click the
Serial Transfer Task
icon on
the Windows Task bar.
2)
Click
Setup
.
The Serial Transfer Task box opens.
3)
In the NMEA Settings and WASSP Settings
tabbed page configure the
Network Setup
and
NMEA Com Port Settings
.
2
Note: If the Serial Transfer Task icon is
not available on the Task Bar, click Start >
Programs > WASSP WMB160/80F Transfer
Task.
If you get the following error, start the
Transfer Task and click
Retry
.
