Page 62 of 68
Doc. P/N: WSP-009-002
Version: V2.3
Issue Date: July 2014
Installation Manual
www.wassp.com
STEP
PROCEDURE
SCREEN
3
Transmit, receive
:
a. Click the MODE button to switch from STBY
(standby) to TX (transmit) mode.
When transmitting, the TX button animates
showing a pulse being transmitted.
4
Set up the selected screen layout
:
a. Right-click anywhere in the selected screen
layout window.
A set of options appears.
b. Click the options you require.
Example of right-click options
5
Perform the profiling operations you require
:
See Operator Manual: OM_WMB_SYS for full
details on operating the system.
6
Quit the WMB-160/80F program
:
When you have completed your profiling operations:
a. Click the
MODE
button to set the transceiver to
standby.
b. Click
Close
on the task bar.
The
Exit System
box appears.
c. Click
OK
.
All files opened by the system are closed auto
-
matically and the program shuts down.
d. Shut down the computer following standard
Windows procedure.
e. Turn the transceiver OFF using the POWER
button on the faceplate.
f. Turn off the satellite compass according to the
manufacturer’s instructions.
The WMB-160/80F system is now shut down
.
STATUS
POWER
Note: The MODE button is disabled
while playing back a demo file. While
in the TX (transmit) mode a demo file
cannot be played back.
A RED counting TX button means that
a ping was requested but no data was
received. A new ping is sent every 5
seconds.
