Page 24 of 68
Doc. P/N: WSP-009-002
Version: V2.3
Issue Date: July 2014
Installation Manual
www.wassp.com
Figure 14 – Transducer to RJ45-type Transceiver Cable Connections
3-pin Plug transmitter
connection
Transmitter Cable
7 Receiver Cables
24 Volt Power
Supply Socket
CAT5 Ethernet
Cable Socket
Figure 14b –
RJ45-type Transceiver Cable Clamp
The transceiver cable MUST be fit
-
ted with the supplied cable clamp to
prevent strain on the RJ-45 connec-
tors where they plug into the front of
the BTxR.
Cable Clamp
The seven receiver cables
MUST be connected in the
order shown. Failure to
do this will result in faulty
operation of the WASSP
system.
RJ-45-Type Transceiver Connections
