Wärtsilä JOVYSTAR COMPACT L
BAX 5624
- 63 -
The various parameters setting pages are similar to each other and requires the operator to enter and
confirm the value; the setting page of the battery capacity is given below as a reference.
Picture 47 – Battery parameters setting
13.3.8 Battery test
The
BATTERY TEST
section allows to carry out a short discharge test of the battery. In case the battery
is not efficient, the alarm “A10 – Battery fault” is generated at the end of the test.
Possible loss of supply
This test can affect the continuity of supply to the loads if the battery is not fully charged.
13.3.9 Setting the display network parameters
The
NETWORK CONFIG
section allows to configure the parameters related to the LAN network and to
the system time synchronization server.
All the parameters that can be set in this section are related to the communication ports (LAN and
RS485) available on-board the
touch screen
.
