Wärtsilä JOVYSTAR COMPACT S
BAX 5452
-
12 -
3 Installation
Remove the packaging immediately after receiving the UPS and check the system for transport damages. The
transport company must be informed immediately after receipt of the UPS in the event of any damage caused
during transportation. If the UPS is not installed immediately it must be stored in an upright position as indicated
on
the packaging and kept in a dry, well ventilated room. If the UPS is not stored in the original packaging, it must
be protected from dust and moisture.
3.1 Handling of the UPS
The UPS is packed on a pallet. It is handled from the transport vehicle to the installation (or storage) place via a
fork lift.
The device has a heavy weight
Avoid turnover during the transport of the UPS.
Cabinets must always be handled in upright position.
During loading and unloading operations, always respect the indications regarding
the device barycentre marked on the package.
Before positioning the UPS, in order to avoid risks of turnover, it’s recommended to move the system on the wood
pallet on which the UPS is fixed. Before the positioning in the final location, remove the UPS from the pallet.
To handle the UPS remove the lower front, rear and side panels and insert the forks of a fork lift. The UPS can be
handled both from the front and from the side according to the available spaces, as shown by the following
picture.
