890557_d•en•01.07.2014
We reserve the right to carry out improvements
59
Position -temp WDEMGE
The “Position D-temp WARMER” value specifies the position or max. position
(for step settings) to which a window is to be moved. The setting range is
0...100%.
Turn the touch wheel to set the limit value “Position D-temp WARMER”.
The function button [
---
] sets the value to [
---
] (position unchanged);
the function button [
Stand.
] sets the value “Position D-temp WARMER” to
0% (factory setting).
Slat angle -temp WDEMGE
This setting is only useful when you have chosen a slat product (external or
internal venetian blinds). If you have connected a slat product (such as an
external venetian blind), you can specify how the slats are to be set after
movement to the "D-temp WARMER" position is completed.
Turn the touch wheel to set the value "Slat angle D-temp WARMER".
The function button [
---
] leaves the slat angle unchanged; the function
button [
Stand.
] sets the value for the “Slat angle D-temp WARMER” to the
product-specific factory setting.
Measured value
temperature
The "Measured value temperature" line indicates the inside temperature cur-
rently measured at the control panel and is for information only.
Measured value outside
temp.
The “Measured value outside temp.” line indicates the outside temperature
currently measured and is for information only.
Push the [
Back
] function button to return to the higher level menu of the tem-
perature control.
Uemperature control
