890557_d•en•01.07.2014
We reserve the right to carry out improvements
30
Wisotronic 1-channel
Operating instructions
Brightness at standby
If the Wisotronic is not operated for longer than 3 minutes, the display is set
to a freely adjustable brightness value (e.g. darkened).
Set this [
Brightness at standby
] in the first menu line:
Press the touch wheel; the value on the right becomes editable and the dis-
play is dimmed to the indicated value.
By turning the touch wheel to the right or left, the bar moves and the bright-
ness is increased or reduced.
You will see the effects by the change of the display. If you select a setting
below 10% (OFF is displayed), the display will go completely dark after 3
minutes. The brightness is increased by turning the touch wheel in a clock-
wise direction.
The [
Stand.
] function button sets the factory setting of 20%.
Brightness at operation
Set the [
Brightness at operation
] in the same manner in the next menu
line.
The brightness during operation can be reduced to a minimum level of 10%.
Darkening the display completely during operation is counterproductive.
The factory setting ([
Stand.
] function button) is 30%.
Button tone
You change the behaviour of the function buttons in the line [
Button tone
].
Turning the touch wheel sets or deletes the checkmark at the right, thereby
activating or deactivating the actuation tone of the function buttons.
The [
Stand.
] function button sets the factory setting.
Ddditional functions
The other functions in this menu are described in detail in
Chapter 7.5.2 on page 87
.
Pushing the function button [
Back
] returns you to the menu [
System
].
Netting started
