890557_d•en•01.07.2014
We reserve the right to carry out improvements
73
7.2.9 Dbsent
This menu allows you to set the position of the sun shading product and, if
applicable, the inclination (angle) of the slats during your absence. The move
command is executed once at the beginning of your absence.
Press the function button [
Sett.
] in the main menu and go to the
[
Comfort functions
] > [
Absent
] menu.
The following view appears in the display:
7.2.9.1 Position
The “Position” value specifies the position to which a sun shading product
is to move at the beginning of your absence. The setting range is 0-100%; a
value of 0% corresponds to the upper limit position and a value of 100% to
the lower limit position.
Turn the touch wheel to set the value “Position”.
The function button [
---
] sets the value for the position to [
---
]; the function
button [
Stand.
] sets the value also to [
---
], i.e. the position of the sun shad-
ing product remains unchanged (factory setting).
7.2.9.2 Slat angle
In this menu line, you specify how the angle of the slats are to be set at the
beginning of your absence. The setting range is from -360° to +360°. Exter-
nal venetian blinds normally have a setting range from -80° to +80°.
Turn the touch wheel to set the value "Slat angle".
The function button [
---
] leaves the slat angle unchanged; function button
[
Stand.
] sets the factory setting.
7.2.9.3 Current state absent
The "Current state absent" line shows the current status of the absent param-
eter and is for informational purposes only.
Start menu
Main menu
Settings
Comfort functions
Absent
Dbsent
