34
Lexa | Instructions for Use | MN-111 Med ENG Rev14 | 03/04/2023 | © W&H Sterilization Srl
Getting started
Sterilizer setup
GUIDED CONFIGURATION
At the first start- up of the sterilizer, the Guided Configuration
procedure automatically appears; this procedure allows to set some
parameters of the unit, such as:
n
Language
n
Network connection (where applicable)
n
Time zone settings
n
Date & time settings
n
Sterilizer name
At any time, to force the Guided Configuration:
1
On the homepage, tap
>
>
>
2
Follow the Guided Configuration on the sterilizer screen.
SET THE DATE AND TIME
To change the date and time format, current date and time and time
zone:
1
On the homepage, tap
>
>
2
Tap the value you want to change (format, time, date and/or
time zone).
3
Tap the desired value.
4
Tap
to confirm and go back to the previous page.
SET THE STERILIZER NAME
To change the sterilizer name that appears in the cycle reports:
1
On the homepage, tap
>
>
>
2
Tap the text box: a keyboard appears.
3
Enter the new sterilizer name.
4
Tap
to confirm.
SET THE DISPLAY BRIGHTNESS
To change the display brightness:
1
On the homepage, tap
>
>
2
Tap
or
to change the value.
3
Tap
to confirm.
CONNECT TO A NETWORK
If you connect through an Ethernet cable, in most cases the sterilizer
will connect to the network automatically. If it does not connect
automatically, or if you are using a Wi-Fi dongle key, follow the
following procedure under supervision of your IT manager / network
administrator.
Summary of Contents for MN-111
Page 1: ...MN 111 Instructions for Use MN 111 Med ENG Rev14...
Page 2: ......
