W&H Med MN-111, Instructions For Use Manual

Page: 29 / 100

Lexa | Instructions for Use | MN-111 Med ENG Rev14 | 03/04/2023 | © W&H Sterilization Srl 29
Getting started
Icon Label Function
Cycle Exclusion
Sets the cycles menu.
Measurement
Units
Sets the unit of measure (temperature, water
conductivity and pressure).
Daily Cycle
Program
Programs a sequence of cycles to be run on daily
basis.
Connectivity
Opens the pages to manage the network connection.
Ethernet Manages the Ethernet network.
WI-FI
Allows wireless network selection and configuration.
Network Status
Only with a network connection set. Provides
information about the network status.
IoDent
Only if this service is supported in the country of use,
and if the sterilizer is connected to it. Shows the
status of the connection with the W&H monitoring
server.
Akidata status
Icon Label Function
Remote Data
Storage
Only with a network connection set. Opens the page
to manage the remote storage.
Settings
Only with a network connection set. Sets the
parameters of the network location.
Save all
Only with a network connection set. Copies all the
files in the specified location in the network.
Test
Only with a network connection set. Checks if the
files can be copied to the specified location.
USB options Enables/disables USB warning messages.
Traceability
Settings Chooses if the sterilizer is master or slave.
Guided
Configuration
Allows to start the configuration of:
n
language.
n
network connection.
n
time zone settings.
n
date & time settings.
n
sterilizer name.