Wallenstein WP240, Operator'S Manual

Page: 44 / 60

8.1 Placing Wood Processor in
Storage
After the season's use or when the machine will not be
used for a period of time, completely inspect all major
systems of the Wood Processor. Replace or repair
any worn or damaged components to prevent any
unnecessary down time at the beginning of the next
season.
Follow this procedure before storing:
1. Remove all material from the machine.
2. Thoroughly wash the machine with a pressure
washer or water hose to remove all dirt, mud or
debris.
3. Inspect all moving parts for entangled material.
Remove all entangled material.
4. Check the condition of winch rope. Replace or
adjust as required.
5. It is best to store the machine inside. If that is not
possible, cover with a waterproof tarpaulin and tie
down securely.
8.2 Removing From Storage
When removing this machine from storage, follow this
procedure:
1. Remove the tarpaulin if covered.
2. Review and follow the pre-operation checklist.
Fig. 42 – Stored position
• Store the unit in an area away from human
activity.
• Do not permit children to play on or around the
stored machine.
• Store the unit in a dry, level area. Support the
frame with planks if required.
• Drain the fuel if storing for longer than 1 month
8. Storage
STORAGE SAFETY
Storage
WP240-WP270
3-Point Hitch Firewood Processor
44