Wallenstein WP240, Operator'S Manual

Page: 29 / 60

4.6 Splitter Chute Height Adjuster
The adjustable sliding bracket controls the height of the
end of the splitter chute, up to 54" (1.37 m). This allows
for split wood to be loaded directly onto a conveyor, or
into a high sided dumper with out any extra handling.
To adjust the splitter chute height:
1. Lift the splitter chute slightly to take pressure off of
the adjuster.
2.
Remove the latch pin that secures hitch pin.
3. Pull out the hitch pin that holds the adjuster in
place.
4. Raise the splitter chute to the required height, line
up the hitch pin holes and replace the hitch pin.
5. Secure the hitch pin with the latch pin.
Fig. 10 – Splitter chute position
Replace the
Hitch Pin
Remove the
Hitch Pin
1
3
5
2
4
WP240-WP270
3-Point Hitch Firewood Processor
Controls
29