40ea manual
- 19 -
Ask the status of the heater by sending:
"1234 S1"
Remote will reply with information of the situation.
Rel 1= Heater on/off
Temp2= room temperature
Volt= Battery voltage.
It takes 15 seconds from the moment of entering the command to update the S4
data. Therefore it is recommended that the ON/OFF OFF/TEMPERATURE com-
mands are sent separately with an interval of at least 15 seconds.
“S” status
This command provides an overview of the status of the 4430 unit. The 4430 unit sends the status data as a text
message to the GSM phone of the person sending the enquiry.
An example of the data received in response to the “1234 S4” command:
Response text message:
Wallas: Heater is off.
Summary of Contents for 40ea
