wallas 40ea, Manual

Page: 15 / 41

40ea manual
- 14 -
Things to note about the connections
In installation, to make the mounting and demounting for service easier, it is recommended to leave some extra length
of loose cables and fuel line by creating a coil. If the installation location is cramped, it is recommend to connect the
cabels and the fuel line to the device before mounting the unit to bracket. This will help the installation of device.
Remote control 4431
Introduction
The remote starter
4430
The remote starter is intended for communicating data through a GPRS network. The unit is
intended for remote controlling of heating devices.
The unit
can be used for starting and stopping
the heater and for monitoring accumulator voltage and the temperature of the premises being
heated. Typical areas of application are ON/OFF switching of boat and cottage heaters.
The unit is controlled remotely by phone. In an area with the GPRS network coverage the unit
can also be controlled by text messages in a GSM network.