40ea manual
- 34 -
Connection to a separate tank
Cap run-throughs and sinter filters are used on plastic tanks.
Volume
length x height x width
Order code
5 l
200 x 300 x 130 mm
2024
Accessory
10 l
380 x 195 x 210 mm
2027
Accessory
33 l
500 x 235 x 355 mm
4030
Accessory
130 l
800 x 400 x 600 mm
4130
Accessory
The fuel connections must be tightened firmly so as to not allow air to leak into the hose. Always check the cleanliness
of the connection surfaces before tightening. Air will cause the device to malfunction
Summary of Contents for 40ea
