Wallace Perimeter Security FOLDSMART, Installation And Maintenance Manual

Page: 66 / 162

66
wallaceperimetersecurity.com
Phone: 866.300.1110
USER MENU FUNCTIONS
Table 4. SmartDC Controller - User Menu Functions Table 4. SmartDC Controller - User Menu Functions
Ref.
No�
User Menu Setting Options
(
Bold
= Factory Settings)
Menu Tasks and Explanations
Associated
DC Controller
Connections
Display
9
PE 0 (OFF)
PHOTO EYE ALIGN
0 = off
1 = on
When set to 1, the operator serves as an
aide in photo-eye transmitter/receiver
alignment. The buzzer chirps once when the
emitter and the receiver are not aligned.
When the emitter and receiver are aligned,
the buzzer chirps twice. If they go out of
alignment again, the buzzer will chirp once.
The Alignment Mode is reset with a close-
limit input or reset input.
Sensor
Common,
Sensor 1,
Sensor 2,
Sensor 3
10
CL 0
SET CLOCK
0 = Display
1 = Set Clock
To set or adjust minute, hour, day, month
or year, select 1. Once clock is set, display
automatically returns to 0 setting. Significant
gate events are logged and stamped with
the time and date. This feature is useful to
read historical operation data, which can
be accessed with a computer via the USB or
RS232 port or the LG setting in User Menu.
See “Setting the Time and Date” on page
61 .
(N/A)
11
LD 5
LCD CONTRAST
5
0 through 9
Under some extreme high or low
temperature conditions, it may be necessary
to adjust the contrast of the LCD display. The
display is adjustable from 0-9 with a factory
default setting of 5.
(N/A)
12
LG 0 (OFF)
VIEW EVENT LOG
0 = off
1 = on
With v5.53 (or later) software, you can set
LG to 1 and view abbreviated event logs on
the display. These messages are helpful for
diagnostic purposes and reviewing the gate
operator’s event history. Over 300 events
can be logged before the software begins
overwriting the existing history.
(N/A)