THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT
GB-07.2005
S
AFETY
INSTRUCTIONS
AND
INFORMATION
C
HAPTER
2
2-11
2.8
Safety instructions for remote control
墌
The remote control is active when the connecting cable is plugged into the machine.
墌
When remote control is in operation, the pendant must not be put down unless the Emergency Stop button
has been pressed. To restart the machine (also after rectifying a fault), the Emergency Stop button must be
released (twist it in the direction of the arrow, or pull it outwards).
墌
Before starting up the remote control, press the Emergency Stop button, so that all control and regulation
devices for remote control are set to “0”.
墌
During interruptions, pauses whilst pumping takes place, also during maintenance and repair work, secure the
remote control against unauthorised use e.g. by locking it in the cab or in a tool box etc.
2.9
Safety instructions for the working area
墌
During operation of the truck-mounted concrete pump, the machine operator is responsible for the entire working
area. The working area must be fully within his field of view, otherwise an assistant is necessary. When leaving the
machine, secure it against unauthorised use and self-acting movement.
墌
Barrier off the working area to other traffic in accordance with instructions.
墌
Personal protective clothing (hard hat, safety glasses, face mask, safety gloves, etc.) must be worn within the
entire working area, in particular when working with cement or with chemical mortar additives.
墌
Unauthorised access to the hazard area of the machine is prohibited. If anyone is in the hazard area, first warn
them, then if they still do not leave the hazard area, shut down the machine.
墌
Never, irrespective of whether the machine is running or not, reach with the hand into the transfer mechanism,
pre-compression system, water tank, transfer tube or other moving part of the machine.
Always first switch the engine off and depressurise the system.
墌
When climbing on to and off the machine, use the handrails and the steps.
Keep steps, platforms, controls and regulation devices etc. free of dirt, oil, snow and ice.
墌
Whilst the machine is running never remove any guards (e.g. water tank cover), nor disable or bypass any
safety devices (e.g. limit switches or mechanical catches for the grill interlocks).
墌
Whilst the pump is running, keep off the machine. All operation should be by remote control only.
