M
AINTENANCE
& I
NSPECTION
C
HAPTER
9
9-2
THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT
GB-07.2005
NOTE:
Consumables such as gearbox oil used during maintenance,
repair and oil change should be collected in suitable
containers and disposed of in accordance with regulations
(to EC directive 75/439/EWG and statutory instruments under
§§ 5a, 5b AbfG and AltölV).
墌
Electrical control equipment, resistors and contactors should be kept clean and cleaned as required.
墌
Check electrical cables for damage to the insulation.
墌
Check mechanical components for wear, deformation, crushing, cracks, breakage, corrosion and secure
mounting.
墌
Regularly check all pipes, hoses and screwed connections for leaktightness and for externally evident damage.
墌
Fluids which emerge at high pressure can be hazardous.
9.2.1
Lubricants and solvents
WARNING:
墌
As far as possible, avoid allowing lubricants and solvents
to contact the skin.
墌
Store fluids, especially hydraulic oils and also engine oils,
lubricants and liquefied or compressed gaseous products,
only in the containers legally prescribed for them.
墌
These should carry appropriate warning notices identifying
their contents.
墌
Comply with all warning notices.
墌
When handling these materials wear protective clothing
at all times (skin, eyes, hand and foot protection).
墌
Used protective clothing must be placed in sealed plastic
sacks after wearing.
WARNING
