manualshive.com logo in svg

Waitzinger THP 94/42 R 4 XXT, User Manual

Share
Download
Waitzinger THP 94/42 R 4 XXT User Manual Download Page 13

THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT

GB-07.2005

S

AFETY

 

INSTRUCTIONS

 

AND

 

INFORMATION

C

HAPTER

 2

2-3

DANGER

WARNING

CAUTION

2.2

Safety symbols

DANGER:

This symbol indicates an immediate danger to life and health of personnel!
Disregard of this information can lead to serious effects on health, through
to life-threatening injuries and even death.

WARNING:

This symbol indicates a possible danger to life and health of personnel!
Disregard of this information can lead to serious effects on health, through
to life-threatening injuries.

CAUTION:

This symbol indicates a situation that may possibly be dangerous!
Disregard of this information can lead to minor injuries or damage to
property.

These symbols are placed in front of the text to which they refer, in order to alert the operator to possible hazards
before undertaking any activity on the machine / equipment.

NOTE:

This symbol is used to draw the operator’s attention to notes and specially
useful information for technical requirements and handling the machine /
equipment.
These notes assist in making the best use of the functions of the machine
/ equipment.

This symbol follows the text to which it relates.

Summary of Contents for THP 94/42 R 4 XXT




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands