765-4203/0100-0000
Commissioning
86
Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
The status of the last Bluetooth
®
firmware update is indicated as follows:
Table 59: Status of the Last Bluetooth
®
Firmware Update
Value
Status
0
Ready for operation
1
Firmware file is being checked
2
Firmware update is being performed
Activating the Bluetooth
®
Interface Using the DM Code Displayed
Note
Never use the product in areas where operation of radio equipment is prohibited.
Never use the Bluetooth
®
interface in areas where operation of radio equipment is prohib-
ited. The module contains a Bluetooth
®
radio transmitter that can impair the function of
medical electronic equipment such as hearing aids and pacemakers. Disable the Blue-
tooth
®
interface in these cases.
Note
Only use the product with Bluetooth
®
if the product has an approval for the specific
country or region.
To enable the Bluetooth
®
interface, you must have the WAGO I/O Field app installed on
the smartphone or tablet. Proceed as follows:
•
A DM code appears in the “Information” section of the
Bluetooth
®
tab. Scan it with
the smartphone or tablet.
ð
The smartphone or tablet then sends an optical sequence (flash code) to the de-
vice’s integrated light sensor.
ð
The light sensor registers this sequence. If the sequence is recognized as correct, the
Bluetooth
®
interface is enabled, and the product attempts to establish a Bluetooth
®
connection to the smartphone or tablet.
Starting a Bluetooth
®
Firmware Update
Proceed as follows to start a Bluetooth
®
firmware update:
1. Click
Update request
.
ð
A dialog appears for selecting the Bluetooth
®
firmware file.
2. Select the firmware file.
ð
The Bluetooth
®
firmware update starts.
Performing a Reset
Proceed as follows to reset the Bluetooth
®
firmware:
•
Click
Reset
.
ð
The Bluetooth
®
firmware is reverted and restarts.
