765-4203/0100-0000
Commissioning
Product manual | Version: 1.0.0
75
4PORT IOL-A FLD EC DC 24V 2.0A
Setting the Filter Time for Digital Inputs
The filter time for the digital inputs can be selected from the
Digital input signal filter
drop-down menu. You can select from the following values:
• No digital input filter
• 3 ms
• 15 ms
• 20 ms
If the
No digital input filter
option is selected, no filtering occurs.
Configure Pin 2 (I/Q)
The behavior of pin 2 (I/Q) can be selected from the
IQ behavior
drop-down menu. For
your IO-Link class A device, the following configuration options are available for using
pin 2 as a digital input or output:
Table 53:
IQ Behavior
Drop-Down Menu – Configuration of Pin 2 (I/Q) for IO-Link Class A Devices
Selection Option
Explanation
Not supported
Pin 2 is not used.
Digital input, normally
open
Pin 2 is a digital input.
Digital input, normally
closed
Pin 2 is a digital input. The signal is inverted.
Digital Output
Pin 2 is a digital output.
Digital output, static on
Pin 2 is a digital output. The signal is permanently set to logic 1 (for testing pur-
poses only).
Configuring the Device Check for Validation and Backup
Note
In the “IOL Autostart” operating mode (see above), this drop-down menu has no ef-
fect.
The
Validation and backup
drop-down menu can be used to determine whether a vali-
dation (device check) is performed and, if so, at what level (Inspection Level) when a con-
nected device is replaced, and whether or not the stored operating parameters of the old
device are carried over to the new one.
The following table explains the possible values for Inspection Level:
Table 54: Possible Values of the
Inspection Level
Parameter
Inspection Level
Description
NO_CHECK
No device check is performed.
TYPE_COMP
A device check for type compatibility is performed.
For the device check, the actual vendor ID is compared to the vendor ID setting in
the configuration, and the actual device ID is compared to the device ID setting in
the configuration.
IDENTICAL
A device check for device identity is performed.
For this purpose, a device check for type compatibility is performed. Furthermore,
the actual serial number is compared to the serial number setting of the configura-
tion.
