WAGO 765-4203/0100-0000, Product Manual

Page: 65 / 122

765-4203/0100-0000 Commissioning
Product manual | Version: 1.0.0 65
4PORT IOL-A FLD EC DC 24V 2.0A
Slot/Module Description
IOL_0/4_I/O byte IO-Link device with 4 bytes of output process data
IOL_0/8_I/O byte IO-Link device with 8 bytes of output process data
IOL_0/16_I/O byte IO-Link device with 16 bytes of output process data
IOL_0/32_I/O byte IO-Link device with 32 bytes of output process data
IOL_1/1_I/O byte IO-Link device with 1 bytes of input process data and 1 bytes of
output process data
IOL_2/2_I/O byte IO-Link device with 2 bytes of input process data and 2 bytes of
output process data
IOL_4/4_I/O byte IO-Link device with 4 bytes of input process data and 4 bytes of
output process data
IOL_8/8_I/O byte IO-Link device with 8 bytes of input process data and 8 bytes of
output process data
IOL_16/16_I/O byte IO-Link device with 16 bytes of input process data and 16 bytes of
output process data
IOL_32/32_I/O byte IO-Link device with 32 bytes of input process data and 32 bytes of
output process data
10.2.1.3 Setting Parameters
You can set the parameters for the module in the configuration software of the EtherCAT
®
master. The existing parameters contain the basic settings for the module, which you can
adapt to your application. Set the module and port parameters in the start-up parameters
in the configuration software of the EtherCAT
®
master. The EtherCAT
®
master sends
these parameters to the module when communication starts up.
You can find all the module parameters in
8
Module Parameters [
}
45] .
10.3 Parameterization
The following tools are described below:
• WAGO Webserver I/O Field
•
8
WAGO IO-Link Configurator [
}
93]
• WAGO I/O Field app
• OPC UA Server
10.3.1 WAGO Webserver I/O Field
10.3.1.1 Call WAGO Webserver I/O Field
This section describes how you can use the integrated software WAGO I/O Field Web-
server to get access to detailed information on the current operating state of the product
and make settings to affect the product’s behavior.
ü
Requirement: Opening the user interface of WAGO I/O Field Webserver requires that
product’s IP address is configured and known.
• Proceed as follows:
Enter the following text in the address bar of your Web browser to address the prod-
uct:
http://<IP-address-according-to-configuration>
e.g.,
http://192.168.10.2
.