WAGO 765-4203/0100-0000, Product Manual

Page: 73 / 122

765-4203/0100-0000 Commissioning
Product manual | Version: 1.0.0 73
4PORT IOL-A FLD EC DC 24V 2.0A
10.3.1.4 Parameterizing the Module via the WAGO I/O Field Webserver
You can make the following settings on the module with WAGO Webserver I/O Field:
•
8 Accessing a Connected IO-Link Device [ } 77]
• 8 Configuring Ports [ } 73]
•
8
Configuring IP Parameters [
}
80]
•
8
Storing Maintenance Information [
}
80]
•
8
Updating Firmware [
}
82]
• 8 Resetting Module to Factory Settings [ } 83]
• 8 Configuring Bluetooth [ } 84]
•
8
Logging Users on and off and Managing Them [
}
87]
•
8
Forcing Digital Inputs and Outputs [
}
90]
•
8
Forcing IO-Link ports [
}
91]
10.3.1.4.1 Configure Ports
Figure 17: Port XX Menu Item, Configuration Tab
The Configuration tab is used to display and modify the following port settings for the se-
lected port of the device:
Table 51: Port Configuration Settings for IO-Link Devices
Name Type Description
Port mode (pin 4) Drop-down menu Port operating mode (configuration of pin 4)
Digital input signal filter
(pin 4) Drop-down menu Filter time for digital input signals on pin 4 (only for
“Port mode (pin 4)” on digital input)
IQ behavior (pin 2) Drop-down menu IQ behavior of the port (configuration of pin 2)
Validation and backup Drop-down menu Validation and Backup Settings for Device Check
When Replacing Devices
PortCycleTime Input field Expected cycle time of the port