WAGNER Wildcat 18-40, Translation Of The Original Operating Manual

Page: 35 / 80

35
Wildcat & Puma 40 cm 3
6
7
4
1
3
B_05292
5
2
OPERATING MANUAL
VERSION 05/2015 ORDER NUMBER DOC2303659
7.4
SPRAYING
7.5
PRESSURE RELIEF/WORK INTERRUPTION
open
closed
If the system has been used with 2K products:
1. Visual check: personal protective
equipment, grounding and all devices
ready to use.
2. Secure the spray gun and place the
nozzle in the gun.
3. Set required working pressure on the
pressure regulator (1).
4. Slowly open the ball valve (2).
5. Optimize the spraying results as laid
down in the gun instructions.
6. Start work process.
1. Close the spray gun.
2. Close ball valve (2).
3. Release the system by opening the gun.
Attention: If a blocked nozzle is preventing ventilation, fi rst carry out the
additional steps 4 and 5, then clean the nozzle.
4. Close and secure gun.
5. Open and close the return valve (3) slowly to completely depressurize the system.
Hardened working material in the spraying system when 2K product is processed!
Destruction of pump and injection system.
Follow the manufacturer's processing rules, particularly regarding the pot life.
Flush thoroughly before the end of the pot life.
The pot life is decreased by heat.
NOTE