WAGNER Wildcat 18-40, Translation Of The Original Operating Manual

Page: 19 / 80

19
Wildcat & Puma 40 cm 3
B_03906
10
9
8
7
5
3
2
1
4
11
6
OPERATING MANUAL
VERSION 05/2015 ORDER NUMBER DOC2303659
The piston pump is driven with compressed air (2). This compressed air moves the air
piston up and down in the air motor (4) and it also moves the associated pump piston up
and down in the fl uid section (9).
In the control housing (1), the air pressure is redirected at the end of each stroke with the
help of the reversing valve. The working material is sucked up during the upwards stroke
and is continuously conveyed towards the product outlet (8) in both stroke directions.
Air motor (4)
The air motor with its pneumatic reverse (1) does not require pneumatic oil.
The compressed air is fed to the motor via the air regulator (2) and the ball valve (3).
Fluid section (9)
The fl uid section has been designed as a piston pump with exchangeable ball valves. The
hard chrome-plated pump piston runs in two fi xed packings which are self-adjusting by
means of a pressure spring, thus resulting in a long service life.
Between the air motor and the fl uid section there is a separating agent cup (7) for separating
the separating agent.
1 Control housing with integrated silencer
2 Air pressure regulator
3 Ball valve
4 Air motor
5 Compressed air inlet
6 Mounting fl ange
7 Separating agent cup
8 Product outlet
9 Fluid section
10 Product inlet
11 Grounding connection
5
DESCRIPTION
5.1
COMPONENTS
5.2
MODE OF OPERATION