WAGNER Wildcat 18-40, Translation Of The Original Operating Manual

Page: 10 / 80

10
Wildcat & Puma 40 cm 3
OPERATING MANUAL
VERSION 05/2015 ORDER NUMBER DOC2303659
2.5
PROCESSABLE WORKING MATERIALS
Abrasive working materials and pigments!
Greater wear of parts carrying the product.
Do not use any grainy and abrasive working materials with large, sharp-edged
pigments.
Use the application-related model (fl ow rate/cycle, material packaging, valve seat,
etc.), as specifi ed in Chapter 5.5.
Check if the fl uids and solvents used are compatible with the pump construction
materials as indicated in Chapter 5.5.1.
NOTE
Wear caused by abrasive working materials is not covered by the warranty.
Working materials
Water-dilutable products
Solvent-based lacquers and paints
Primers
Epoxy and polyurethane lacquers, phenolic lacquers
Liquid plastics
Wax-based underside protection
Chemically aggressive products that attack carbide seats
Legend: recommended limited suitability less suitable
2.6
RECOMMENDED APPLICATION AREAS
Application area
Furniture industry
Kitchen manufacturers
Joinery
Window factories
Steel-processing industry
Construction of vehicles
Shipbuilding
Legend: recommended limited suitability less suitable