WAGNER Wildcat 18-40, Translation Of The Original Operating Manual

Page: 14 / 80

14
Wildcat & Puma 40 cm 3
OPERATING MANUAL
VERSION 05/2015 ORDER NUMBER DOC2303659
4
GENERAL SAFETY INSTRUCTIONS
4.1
SAFETY INSTRUCTIONS FOR THE OPERATOR
Keep this operating manual at hand near the device at all times.
Always follow local regulations concerning occupational safety and accident
prevention.
4.1.1
ELECTRICAL EQUIPMENT
Electrical devices and equipment
To be provided in accordance with the local safety requirements with regard to the
operating mode and ambient infl uences.
May only be maintained by skilled electricians or under their supervision. With open
housings, there is a danger from line voltage.
Must be operated in accordance with the safety regulations and electrotechnical
regulations.
Must be repaired immediately in the event of problems.
Must be decommissioned if they pose a hazard or are damaged.
Must be de-energized before work is commenced on active parts. Inform staff about
planned work. Observe electrical safety regulations.
Ground all devices to a common grounding point.
Only operate the device with a properly installed socket with a protective ground wire
connection.
Keep liquids away from electrical devices.
4.1.2
PERSONNEL QUALIFICATIONS
Ensure that the device is operated, maintained and repaired only by trained persons.
4.1.3
SAFE WORK ENVIRONMENT
Ensure that the fl oor in the working area is static dissipative in accordance with
EN 61340- 4-1 (resistance must not exceed 100 megohms).
Paint mist extraction systems / ventilation systems must be fi tted on site according to
local regulations.
Ensure that product hoses / air hoses adapted to the working pressure are used.
Ensure that personal protective equipment is available and is used.
Ensure that all persons within the working area wear static dissipative shoes. Footwear
must comply with EN 20344. The measured insulation resistance must not exceed
100 megohms.