WAGNER Wildcat 18-40, Translation Of The Original Operating Manual

Page: 27 / 80

27
Wildcat & Puma 40 cm 3
B_04330
2
1
3
4
5
B_03912
1
3
2
B_03703
4
OPERATING MANUAL
VERSION 05/2015 ORDER NUMBER DOC2303659
Instead of the standard high-pressure fi lter, the lower-
cost ventilation combination can be used if only a small
volume of product is to be processed.
Application: in pumps with a maximum product pressure
of 270 bar; 3,916 psi.
You will fi nd the relief combination and the suitable fi lter
inserts in the accessories list.
1 Fluid section connection
2 Relief combination
3 Return line
4 Paint fi lter
5 Product outlet
5.7.2
RELIEF COMBINATION AND INLINE FILTER UP TO 270 BAR (OPTION)
5.8
STROKE COUNT (OPTION)
Each air motor has a 1/8" air connection with which the air pressure in the lower air motor
chamber can be measured. This signal can be used for counting the strokes in an external
control, for example.
The pressure signal corresponds to the set working air pressure and is available during the
complete upwards stroke of the pump. If both of the signal fl anks are evaluated, the upper
and lower reversal point can be determined. A 4/2-mm; 0.16/0.08-inch air hose is used as
an air signal line.
27 MPa; 270 bar; 3916 psi
Order No. Designation
1 9998675 Threaded plug
2 9999066 Male stud elbow
3 9982072 Air hose (per meter)
4 9943049 Pneumatic pre-selection counter