WAGNER Wildcat 18-40, Translation Of The Original Operating Manual

Page: 29 / 80

29
Wildcat & Puma 40 cm 3
B_04065
OPERATING MANUAL
VERSION 05/2015 ORDER NUMBER DOC2303659
6.3
TRANSPORTATION
Only the pump without trolleys may be lifted by the ring nut or
lifting eye bolt (see accessories) and transported short distances.
The pump can be moved on a trolley(4"-trolley) or manually
without lifting equipment or a crane.
6
ASSEMBLY AND COMMISSIONING
6.1
TRAINING ASSEMBLY/COMMISSIONING STAFF
6.2
STORAGE AND INSTALLATION CONDITIONS
Until the point of assembly, the device must be stored in a dry location, free from vibrations
and with a minimum of dust. The device must be stored in closed rooms. For specifi cations
on temperatures and relative humidity, see Technical Data.
Long-term Storage : Thoroughly clean the pump, if a long-term decommissioning is
planned. See the "Cleaning" chapter. For recommissioning, proceed according to following
chapters.
A skilled person must check to ensure that the device is in a reliable state after it is installed
and before commissioning.
The assembly and commissioning staff must have all technical skills necessary to safely
commission the device.
When assembling, commissioning and carrying out all work, read and follow the
operating manuals and safety regulations for the additionally required system
components.
Inclined ground!
Risk of accidents if the device rolls away/falls.
Position the trolley with the piston pump horizontally.
If the surface is inclined, position the feet of the trolley towards
the gradient.
Secure the trolley.
WARNING