1SP4QSBZr
GB
Starting operation
4
4.2
Control Panel Indicators
The following is a description of the control panel indicators.
Pressure
Indicator
Service
Indicator
Pressure Indicator
The pressure indicator shows the current operating pressure of the
sprayer. It has three different indications: blinking yellow, solid
yellow, and solid green.
Blinking Yellow
When the pressure indicator is blinking yellow, the sprayer is
PQFSBUJOHCFUXFFOBOE.1B CBS"CMJOLJOHZFMMPX
pressure indicator means:
r 5IFTQSBZFSJTQMVHHFEJOBOEUVSOFEi0/u
r 5IFTQSBZFSJTBUQSJNJOHQSFTTVSF MJUUMFPSOPQSFTTVSF
r *UJTTBGFUPNPWFUIFSFMJFGWBMWFCFUXFFOQPTJUJPOT
r *UJTTBGFUPDIBOHFPSSFQMBDFUIFTQSBZUJQ
i
If the pressure indicator begins blinking yellow when
the pressure control knob is set at a higher pressure
and the relief valve is in the SPRAY position, either
the spray tip is worn or the sprayer is in need of
service/repair.
Solid Yellow
When the pressure indicator is solid yellow, the sprayer is operating
CFUXFFO.1B CBSBOE.1B CBS"TPMJEZFMMPX
pressure indicator means:
r 5IFTQSBZFSJTBUUIFQSPQFSQSFTTVSFTFUUJOHGPSTQSBZJOHTUBJO
MBDRVFSWBSOJTIBOENVMUJDPMPST
Solid Green
When the pressure indicator is solid green, the sprayer is operating
CFUXFFO.1B CBSBOE.1B CBS"TPMJEHSFFO
pressure indicator means:
r 5IFTQSBZFSJTBUUIFQSPQFSQSFTTVSFTFUUJOHGPSTQSBZJOHPJM
CBTFEBOEMBUFYIPVTFQBJOUT
r 5IFTQSBZFSJTPQFSBUJOHBUQFBLQFSGPSNBODFBUBIJHI
pressure setting
r *GUIFQSFTTVSFJOEJDBUPSHPFTUPTPMJEZFMMPXXIFOUIF
pressure is set so that it starts at solid green, it indicates one of
the following:
a.
Tip Wear Indicator
XIFOTQSBZJOHXJUIMBUFYPSBUIJHI
pressure the solid yellow appears. This means the tip is
worn and needs to be replaced.
b.
Tip Too Large
— when a tip that is too large for the sprayer
is put in the gun, the pressure indicator will turn from solid
green to solid yellow.
c.
Fluid Section Wear
— if a solid yellow pressure indicator
appears when using a new tip and the pressure is set at
NBYJNVNTFSWJDFNBZCFSFRVJSFE XPSOQBDLJOHTXPSO
piston, stuck valve, etc...).
Service Indicator
The Service indicator is on when the motor is commanded to run.
This indicator is used by service centers to troubleshoot motor
problems.
4.3
Pressure control knob settings (Fig. 6)
.JOJNVNQSFTTVSFTFUUJOH
2. Black zone – no pressure generation
3. Blue zone – pulsating pressure for cleaning
1
2
3
4.4
Connection to the mains network
Attention
The unit must be connected to an appropriately-
grounded safety outlet.
Before connecting the unit to the mains supply, ensure that the line
WPMUBHFNBUDIFTUIBUTQFDJñFEPOUIFVOJUTSBUJOHQMBUF
5IFDPOOFDUJPONVTUCFFRVJQQFEXJUIBSFTJEVBMDVSSFOUQSPUFDUJWF
EFWJDFXJUI*/'ŵN"
i
Wagner‘s accessories program also includes a mobile
operator protection device for the electronic supply,
which can also be used with other electronical
equipment.
