background image

UNPACKING

After unpacking unit, inspect carefully for any 

damage that may have occurred during transit. 

Check for loose, missing, or damaged parts. If any 

damage is observed, a shipping damage claim must 

be filed with carrier. Do not use the DURALAST

®

 HVLP 

Spray Gun if broken, bent, cracked or damaged parts 

(including labels) are noted. Any HVLP Spray Gun that 

appears damaged in any way, operates abnormally 

or is missing parts should be removed from service 

immediately. If you suspect that the HVLP Spray Gun 

was subjected to shock load (a load that was dropped 

suddenly, unexpectedly, etc.) immediately discontinue 

use until it has been checked by a factory authorized 

service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all 

safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please 

retain instructions for future reference.

The following safety information is provided as a guideline to help you operate your HVLP Spray Gun under the safest possible conditions. Any tool or piece 

of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions 

are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of 

your tool. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that uses the equipment understands 

and follows these safety instructions as well.

Operating Instructions and Parts Manual 

80-376

05/15

2015 DURALAST

HVLP

SPRAY GUN

®

®

Explanation of Safety Signal Words

 WARNING

:  Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

 CAUTION

:  Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION

:  Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property 

damage.

NOTES

: Provide clarity and helpful information.

WARNING

Summary of Contents for HVLP









Reviews: