65
65
POWER SAVING FEATURES
When configured for wireless operation, Bamboo uses a number of power saving features to conserve the
tablet battery charge and improve performance.
Conserve battery power by turning off the wireless module when you are done working.
Important: The tablet draws current from the battery whenever the wireless module is on. Even in
sleep mode a very small trickle of current will continue to flow, leading to eventual battery discharge
and possible failure. It is a good idea to charge the battery and turn off the wireless module before
leaving the tablet unused for a number of days. See
.
Power saving mode
Tablet enters power saving mode after 2 minutes of no user input. The time
parameter can be adjusted in the Bamboo control panel. See
Depending on your tablet model, wake from power saving mode by touching the
tablet, pressing an ExpressKey, or placing the pen in proximity.
Sleep mode
Tablet enters sleep mode:
•
When there is no wireless connection for more than 4 seconds. For example,
you switch off the computer, move the tablet out of range, or unplug the
wireless receiver. To resume operations, correct any problem and ensure the
tablet is within range of your computer. Then press the power button on the
Wacom wireless module. See
•
After 30 minutes of no user input.
•
When the battery level is extremely low. Recharge the battery immediately.
To wake from sleep mode, first press the power button on the wireless module.
Depending on your tablet model, touch the tablet surface with your finger or the
pen. Then move your finger or pen along the tablet to fully activate Bamboo.
