Wacker Neuson RD24, Instruction Manual

Page: 91 / 228

Operation
Stopping the machine because of a fault
BA RD24_RD27 en 04 91
3.18 Stopping the machine because of a fault
NOTICE
Severe malfunctions!
Damage or destruction of machine components caused by continuing
operation despite serious faults.
■
When a serious fault is indicated, immediately stop the machine at
a safe position outside the danger zone.
■
Determine and remove the cause of the alfuction.
■
Do not use the machine again until the fault has been rectified.
4 3 1
2 1
[1] System info [2] Indicator for serious fault
[3] Indicator for serious fault
(STOP)
[4] Fault notification
In case of a serious fault:
a
A permanent audible signal is heard.
a
At least one warning light is lit.
a
The system information [1] indicates an error code.
For the standard version:
a
The warning light by the side of the system information [2] is flashing.
For versions with add-on equipment:
a
The STOP warning light [3] is flashing.
Further operation is inadmissible!
Park the machine out of the danger zone.
Shut down the diesel engine immediately.
Rectify the cause immediately.
N O T E
Write down the error code indicated. If you cannot correct the
error yourself, please contact the customer service.