Wacker Neuson RD24 Instruction Manual Download Page 197

Page: 197 / 228

Auxiliary equipment

Rotating beacon

BA RD24_RD27 en 04

197

6.02

Rotating beacon

6.02.01

Overview

[1]

Rotating light mounted

[2]

Contact tube

[3]

Clamping screw

[4]

Plug contact

6.02.02

Description

The rotating beacon is an orange warning light that radiates light over a

360° area.
A switched on rotating beacon visual identifies, marks and safeguards

danger areas.

6.02.03

Mounting/Dismounting

WARNING

Work above floor level!

Risk of injury caused by falling.

■

All work above floor level must only be carried out using a stable

ladder or on maintenance scaffolding.

■

To reach the maintenance points on the machine, use the

designated steps and treads. Do not step on any other machine

element or add-on part.

Summary of Contents for RD24





































































































































































































































Search results

Summary of Contents for RD24

Reviews:

Related manuals for RD24

Brands by name

Popular brands

Wacker Neuson RD24, Instruction Manual

Search results

Summary of Contents for RD24

Reviews:

Related manuals for RD24

Brands by name

Popular brands