Wacker Neuson RD24, Instruction Manual

Page: 56 / 228

Operation
Important information about operating the machine
56 BA RD24_RD27 en 04
3 OPERATION
3.00 Important information about operating the machine
Operating the machine requires specialist knowledge about driving
construction machines. Only authorized operating personnel may operate
the machine.
The following safety instructions apply to all operating activities machine.
DANGER
Operating errors!
Danger to life and limb and risk of injuries and material damage
through improper operation of the machine.
■
Check the machine for operational and traffic safety.
■
Read and observe the instruction manual and the safety manual.
■
Ensure that there are no persons or objects in the danger zone of
the machine.
DANGER
Uncontrolled driving behavior!
Risk of fatal injury due to the machine's own driving movements or due
to any uncontrolled movement.
■
Do not continue to operate the machine in the event of error
messages about safety-related components. Switch off the
machine, park it in a safe place, and inform customer service.
■
Allow only specially trained and authorized personnel to work on
safety and control-relevant components.
■
After work on control-relevant component, the control system must
be reset by authorized service personnel.
WARNING
Exposed, rotating parts!
Risk of being trapped, pulled in, and injured by rotating engine parts.
■
Operate the machine only with the engine bonnet and the engine
compartment door closed.
■
Do not perform any testing and adjusting work in the area of the
engine unless the diesel engine has been switched off.
■
Do not lay down any object or tool in the engine compartment.
WARNING
Unintended machine movement!
Serious injuries or death through unexpected movement of the
machine during testing and setting work, and outside the operation.
■
Do not carry out any testing and adjusting work unless the engine
has been stopped and the ignition has been switched off.
■
Park the machine on safe ground, i.e., flat and horizontal ground
with sufficient bearing capacity.
■
Secure machine against rolling away.