Safety Information
G 50/G 70/G 85
wc_si000158gb.fm
6
2.
Safety Information
This manual contains DANGER, WARNING, CAUTION,
NOTICE
and
NOTE callouts which must be followed to reduce the possibility of
personal injury, damage to the equipment, or improper service.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
:
Used without the safety alert symbol,
NOTICE
indicates a
hazardous situation which, if not avoided, could result in property
damage.
Note:
Contains additional information important to a procedure.
Danger of Electrocution!
Danger of electrocution or severe electrical shock is present
throughout the generator any time the engine is running! Read all
safety notes contained in this section before operating or servicing this
equipment.
No one except a trained electrician, familiar with this equipment,
should attempt repairs to the generator! Test procedures which require
that the generator be running must be performed using extreme
caution.
DANGER
WARNING
CAUTION
DANGER
Summary of Contents for G70
