Wacker Neuson EZ38 Operator'S Manual Download

Page: 122 / 254

5-26

OM EZ38 us 1.1 * ez38b510.fm

Swiveling the boom

Press and hold button

on the left-hand control lever base.

Swiveling the boom to the right:

Press pedal

forward.

Swiveling the boom to the left:

Press pedal

backward.

Swiveling the boom (proportionally controlled)

1. Turn the rotary switch on the right-hand control lever base to the

required position.

2. Press and hold button

on the left-hand control lever base.

Swiveling the boom

Swiveling the boom to the right:

Push slide switch

on the right-hand control lever to the right.

Swiveling the boom to the left:

Push slide switch

on the right-hand control lever to the left.

Fig. 158

Fig. 159

Fig. 160

Fig. 161

Summary of Contents for EZ38































































































































































































































































Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands

Wacker Neuson EZ38, Operator'S Manual

Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands