Wacker Neuson EZ38 Operator'S Manual Download Page 138

Page: 138 / 254

5-42

OM EZ38 us 1.1 * ez38b510.fm

5.11 Work operation

Inadmissible work procedures

Working with the swivel force

• Do not use the swivel force of the upper carriage to tear down walls or

to create level surfaces.

• Never ram the attachment into the ground when swiveling the upper

carriage.

➥

This can damage the machine or the attachment.

Working with the travel force

• Never ram the attachment into the ground to dig when traveling.

➥

This can damage the machine or the attachment.

Retracting the attachment

• During retracting the attachment, ensure that it does not touch the

stabilizer blade.

Avoid impact during operation to avoid damage to the excavator
bucket and machine components.

• Do not use the falling force of the attachment as a hoe, hammer or pile-

driver.

➥

Working this way can greatly reduce the machine’s service life.

Fig. 187

Fig. 188

Fig. 189

Fig. 190

Summary of Contents for EZ38































































































































































































































































Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands

Wacker Neuson EZ38, Operator'S Manual

Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands