Wacker Neuson EZ38 Operator'S Manual Download

Page: 188 / 254

7-26

OM EZ38 us 1.1 * ez38w700.fm

Control lever base

CAUTION

Crushing hazard in the area of the moving parts of the control lever
base!

Can cause minor injuries.

►

Keep extremities and clothing clear of the window channel.

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Raise the control lever base.
3. Spray fluid grease onto guide lever

4. Spray fluid grease on both sides of the double spring

5. Raise and lower the control lever base several times.

Information

Keep the lubrication points clean and remove ejected grease.

Powertilt/Powertilt with Easy Lock (option) when used in water

• Apply grease to the lubrication points before using the Powertilt unit in

water.

• After using the Powertilt unit in water, apply grease to the lubrication

points to remove all water.

Fig. 241

Summary of Contents for EZ38































































































































































































































































Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands

Wacker Neuson EZ38, Operator'S Manual

Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands