Wacker Neuson EZ38 Operator'S Manual Download

Page: 52 / 254

4-4

OM EZ38 us 1.1 * ez38i400.fm

Opening/closing the front window

CAUTION

Crushing hazard due to unlocked cabin door!

Can cause minor injuries.

►

Always lock the cabin doors.

►

Use the handholds for closing the doors.

CAUTION

Crushing hazard! Be careful when opening and closing the front
window.

Can cause minor injuries.

►

Hold both handles.

►

Duck your head.

►

Let both locks lock into place.

►

Keep extremities and clothing clear of the window channel.

Opening the front window

1. Keep levers

pressed on the left and right, and pull the front window

upward with both handles

Fig. 54

Fig. 55

Summary of Contents for EZ38































































































































































































































































Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands

Wacker Neuson EZ38, Operator'S Manual

Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands