Wacker Neuson EZ38 Operator'S Manual Download

Page: 72 / 254

4-24

OM EZ38 us 1.1 * ez38i400.fm

Protective FOPS structure/large screen – level I (option)

DANGER

Crushing hazard! Falling objects.

Will cause severe injury or death.

►

Install a protective FOPS structure in areas with risk of falling objects.

►

Machine operation is prohibited without a protective FOPS structure.

Information

The protective FOPS structure corresponds to level I according to ISO
3449:2008.

►

The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.

►

The machine owner must ensure that only work is performed that does
not require any higher protection.

►

Accidents cannot be fully avoided despite equipping a machine with
protective structures.

Summary of Contents for EZ38































































































































































































































































Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands

Wacker Neuson EZ38, Operator'S Manual

Search results

Summary of Contents for EZ38

Reviews:

Related manuals for EZ38

Brands by name

Popular brands