1 - 7
INTRODUCTION
JUNE 2021
32DSKF02.D
TITANIUM S-SERIES AND K-SERIES
PUBLIC USE SERVICE MANUAL
TABLE 1-2: TITANIUM K-SERIES PUBLIC USE LIFT COMPONENT TERMS
REF
NAME
DESCRIPTION
1, 2,
3, 4
Left, right,
front, rear
Position references when lift is viewed from outside of vehicle.
5
Audible alarm
(inside housing for hydraulic unit) Announces when something has
passed over threshold. Activated by threshold beam.
6
Baseplate
assembly
Bolts to vehicle floor; provides secure foundation for lift.
7
Bridgeplate
(inboard rollstop)
Plate bridges gap between platform and baseplate when platform is at
floor level. Acts as barrier to prevent wheelchair from rolling off of the plat-
form during "Up" and "Down" platform motions.
8
Control pendant
Water resistant, hand-held device controls platform motions.
9
Cycle counter
Visible at rear of housing, it records number of times platform has moved
from floor to ground and back to floor.
10
Front rollstop
Front barrier prevents the wheelchair from inadvertently rolling off of the
platform during lift operation.
11
Handrail
(left and right) Provides a handhold for standing passenger.
12
Hydraulic cylinder
(left and right) Telescoping single-acting cylinders convert
hydraulic pressure into platform lifting and folding force.
13
Hydraulic power unit
Contains hydraulic pump driven by electric motor that produces pressure
to raise and fold platform, and a pressure release valve to unfold and lower
it.
14
Manual backup pump
handle
Used to operate manual back up-pump (located on hydraulic power unit
cover).
15
Occupant restraint
belt
Electrically interlocked safety belt that is intended to prevent acceleration
of wheelchair from platform. Lift will not operate unless belt is properly
connected.
16
Platform (Front)
Front portion of platform that unfolds during deploy and folds during stow.
See “Platform folding linkage”.
17
Platform (Rear)
Rear portion of platform that is folded by linkage located within the vertical
arms.
18
Platform LED Light
(left and right) Directs light onto platform surface.
19
Platform Folding
Linkage
(left and right) Directs light onto platform sur-face.
20
Serial Number
Location of lift serial number decal.
21
Sto-Loc Catch
Engages latch located on bottom of bridgeplate when platform is fully
stowed.
22
Switch (Bridgeplate
Load Sensor)
Senses if weight is pre-sent on the lowered bridgeplate.
23
Threshold Warning
System (TWS)
Light-beams detect some-thing passing through the threshold area while
platform is below floor level.
24
Top and Bottom
Arms
(left and right) - Upper and lower links that connect vertical arms to
baseplate.
25
Vertical Arm
left and right) - Connects platform to top and bot-tom arms.
26
Visual Alarm
Flashing light makes it known when something passes through threshold
area. Activated by threshold beams.
END OF TABLE
